JDepend

 Summary
JDepend traverses Java class file directories and generates design quality metrics for each Java package. JDepend allows you to automatically measure the quality of a design in terms of its extensibility, reusability, and maintainability to effectively manage and control package dependencies.


Mike Clark
Clarkware Consulting, Inc.

 
  Table Of Contents

 
  Overview

JDepend traverses Java class file directories and generates design quality metrics for each Java package, including:

 
  Why Use JDepend?

Before using JDepend, it is important to understand that good design quality metrics are not necessarily indicative of good designs and bad design quality metrics are not necessarily indicative of bad designs. The design quality metrics produced by JDepend are intended to be used by designers to measure the designs they create, understand those designs, and automatically check that the designs exhibit expected qualities while undergoing continuous refactoring. Refactoring will undoubtedly lead to some adjustment of these metrics as the shape of the design changes. Most importantly, the design quality metrics produced by JDepend should not be used as yard sticks by which all designs are measured.

Measure Design Quality

The quality of a design can be measured in part by quantifying its degrees of extensibility, reusability, and maintainability. These qualities are all influenced by the inter-package dependencies of the design. Designs are more extensible when they are independent of implementation details, allowing them to adapt to new implementations without internal modification or breaking their existing contracts. This same independence tends to increase the reuse potential of portions of the design. Independent portions of the design containing high-level abstractions can be extracted from portions containing implementation details. The maintainability of a design is improved when changes can easily be made without propagating to other parts of the system. JDepend allows you to automatically measure the quality of a design in terms of its extensibility, reusability, and maintainability to effectively manage and control package dependencies.

Invert Dependencies

The goal of using JDepend is to ultimately invert package dependencies such that low-abstraction packages depend upon high-abstraction packages. This inversion of dependencies allows the high-abstraction packages to be reused independently while being extensible to an open set of implementations. In general, dependencies upon stable packages are desirable, while dependencies upon instable packages are undesirable. JDepend allows dependencies to be iteratively examined and refactored as an integral part of software design and development.

Foster Parallel, Extreme Programming

Packages that are stable should be the centerpieces of a loosely coupled application so the speed of the development team is not adversely affected by the propagation of software changes. Stable packages form design-by-contract facades to other subsystems, allowing teams to develop in parallel at an extreme pace. Moreover, by measuring the software design quality, the overall impact of proposed software changes can be accurately estimated. JDepend allows teams to identify and use desirable dependencies in the system and avoid those dependencies that cause changes to ripple throughout the system.

Isolate Third-Party Package Dependencies

Third-party package dependencies can be easily identified and isolated by examining the afferent couplings to those packages. Once the dependency on these third-party packages has been measured with JDepend, the dependency can be managed by effectively designing abstract and stable packages that encapsulate the third-party package implementation details.

Package Release Modules

Packages that are cohesive and independent can be released as autonomous modules with their own release schedules and version numbers. Single packages, or groups of related packages collaborating in a framework, that are candidates for independent release can be harvested by evaluating their design quality metrics using JDepend.

Identify Package Dependency Cycles

Packages participating in a package dependency cycle are in a deadly embrace with respect to reusability and their release cycle. Package dependency cycles can be easily identified by reviewing the textual reports of dependency cycles. Once these dependency cycles have been identified with JDepend, they can be broken by employing various object-oriented techniques.

 
  Downloading JDepend

JDepend 2.8 is the latest major version release. It includes all the minor version changes.

The distribution contains a JAR file, source code, sample application, API documentation, and this document.

 
  Installing JDepend

Windows

To install JDepend, follow these steps:

  1. Unzip the jdepend.zip distribution file to a directory referred to as %JDEPEND_HOME%.

  2. Add JDepend to the classpath:

    set CLASSPATH=%CLASSPATH%;%JDEPEND_HOME%\lib\jdepend.jar

Unix (bash)

To install JDepend, follow these steps:

  1. Unzip the jdepend.zip distribution file to a directory referred to as $JDEPEND_HOME.

  2. Change file permissions:

    chmod -R a+x $JDEPEND_HOME

  3. Add JDepend to the classpath:

    export CLASSPATH=$CLASSPATH:$JDEPEND_HOME/lib/jdepend.jar

 
  Building And Testing JDepend

The JDepend distribution includes the pre-built classes in the $JDEPEND_HOME/lib/jdepend.jar file.

Building

An Ant build file is included in $JDEPEND_HOME/build.xml to build the $JDEPEND_HOME/lib/jdepend.jar file from the included source code.

To build JDepend, use: 

cd $JDEPEND_HOME
ant jar

Testing

The JDepend distribution includes JUnit test cases to validate the integrity of JDepend.

To test JDepend, use: 

cd $JDEPEND_HOME
ant test

 
  Running JDepend

JDepend provides a graphical, textual, and XML user interface to visualize Java package metrics, dependencies, and cycles.

Graphical UI

The graphical user interface displays a hierarchical tree for both the afferent and efferent couplings of each analyzed Java package.

To run JDepend with the graphical user interface, use the following syntax: 

java jdepend.swingui.JDepend [-components <components;>] <directory> [directory2 [directory 3] ...]

For example, to analyze all the Java class files in the $JDEPEND_HOME/build directory, use: 

java jdepend.swingui.JDepend $JDEPEND_HOME/build

Textual UI

The textual user interface displays detailed metrics, dependencies, and cycles for each analyzed Java package. For the convenience of importing these metrics into other applications, the summary section contains comma-separated metrics for each Java package. Alternatively, the XML user interface can be used for easier integration with other tools.

To run JDepend with the textual user interface, use the following syntax: 

java jdepend.textui.JDepend [-components <components>] [-file <output file>] <directory> [directory2 [directory 3] ...]

For example, to analyze all the Java class files in the $JDEPEND_HOME/build directory, use: 

java jdepend.textui.JDepend $JDEPEND_HOME/build

Alternatively, the text report can be written to file using: 

java jdepend.textui.JDepend -file report.txt $JDEPEND_HOME/build

Example output from the textual UI shows the analysis of the sample application, an example electronic payment framework. The relevant source for the sample application is distributed in $JDEPEND_HOME/sample.

XML UI

The XML user interface displays detailed metrics, dependencies, and cycles for each analyzed Java package in an XML format for easier integration with other tools.

To run JDepend with the XML user interface, use the following syntax: 

java jdepend.xmlui.JDepend [-components <components>] [-file <output file>] <directory> [directory2 [directory 3] ...]

For example, to analyze all the Java class files in the $JDEPEND_HOME/build directory, use: 

java jdepend.xmlui.JDepend $JDEPEND_HOME/build

Alternatively, the XML report can be written to file using: 

java jdepend.xmlui.JDepend -file report.xml $JDEPEND_HOME/build

Example output from the XML UI shows the analysis of the sample application, an example electronic payment framework. The relevant source for the sample application is distributed in $JDEPEND_HOME/sample.

You can then transform the XML format into a format of your liking. For example, David Bock contributed an XSL stylesheet that transforms the JDepend XML output into a Graphviz dot file format. David's stylesheet is in the file contrib/jdepend2dot.xsl.

To create a sample Graphviz file, use: 

ant jdepend-to-graphviz

This will create a docs/jdepend-report.dot file. If you have Graphviz installed, you can then convert that .dot file into a .png file using: 

dot -Tpng -o jdepend.png jdepend.dot

 
  Graphical UI Navigation

The graphical user interface displays the afferent and efferent couplings of each analyzed Java package, presented in the familiar Java Swing tree structure.

Figure 1 shows the analysis of the sample application, an example electronic payment framework. The relevant source for the sample application is distributed in $JDEPEND_HOME/sample.


Figure 1 (Click to view full-scale)

The root of each tree displays a branch for each analyzed Java package, annotated with the following metrics:

For organizational purposes, package metrics are only displayed at the root of each tree. For convenience, selecting any node of the tree displays the currently selected package's metrics in the status bar.

Efferent Couplings

The top tree displays the efferent couplings of each analyzed Java package. Branches of the tree can be opened up to explore packages that the currently selected package depends upon (Figure 2).


Figure 2

For the epayment.adapters package, we see that it depends upon 4 other packages: the com.abc.epayment, com.xyz.epayment, epayment.framework, and the epayment.response packages. Furthermore, it's completely concrete (A=0) and completely instable (I=1). This balance earns it a spot squarely on the main sequence (D=0). We can conclude from these metrics that dependencies on this package are undesirable because it's both dependent and irresponsible. It's sensitive to modifications made to any of it's efferent couplings and not accountable to any other package. Therefore, it's important that other packages in the system not become dependent on this package, as they'll in turn become fragile by any modifications made to the details of the epayment.adapters package and its dependencies. As a concrete package, it's not capable of being extended without being modified.

For the epayment.framework package, we see that it does not depend on any other packages in the application (Ce=0). However, it is responsible to every other package (Ca=5) while exhibiting a high degree of abstractness (A=0.83) and stability (I=0). While not completely balanced, this package is very near the main sequence (D=0.17). We can conclude from these metrics that dependencies on this package are desirable because it's both independent and responsible. It's abstractness also indicates that it's capable of being extended to accomodate new implementations without being modified.

Packages that were imported, but not analyzed, are not shown in the efferent dependency tree. Third-party software packages that weren't analyzed, for example, will not be shown in the efferent tree, as their efferent dependencies are not available.

Afferent Couplings

The bottom tree displays the afferent couplings of each analyzed Java package. Branches of the tree can be opened up to explore packages that use the currently selected package (Figure 3).


Figure 3

For the epayment.adapters package, we see that it is not used by any other package in the application. This confirms our observations of the efferent dependency tree.

For the epayment.framework package, we see that it's used by all the other user-defined packages in the framework. However, it does not have any efferent couplings (Ce=0) and exhibits a high degree of abstractness (A=0.83) and stability (I=0). This is a requirement of a software framework - we want it to be heavily used, thereby making it very responsible to its clients, yet be highly abstract to allow extensibility without modification.

For the com.abc.epayment package, a third-party software package, we see that it's used by the epayment.adapters package. There are no metrics displayed for this package however, as it's a third-party package that was not analyzed by JDepend. It was imported by a user-defined package (epayment.adapters), so it is shown in the afferent dependency tree.

Using the afferent dependency tree, it's easy to identify which user-defined packages are dependent upon third-party software packages.

 
  Interpreting Dependency Cycles

Package dependency cycles are best observed using the textual or XML user interface. In general, all packages dependencies that intersect a dependency cycle are reported. This includes packages directly participating in a cycle and packages that depend on packages directly participating in a cycle.

The intent is to identify sets of packages that must be reused and released together. To break reported cycles, focus on those packages directly participating in a cycle.

Here's an example of a two-package cycle, as reported by the textual UI: 

    com.xyz.ejb
       |
       |   com.xyz.servlet
       |-> com.xyz.ejb

This indicates that the com.xyz.ejb package depends on the com.xyz.servlet package, which in turn depends on the com.xyz.ejb package. These two package must be released and reused together.

Here's an example of a package that depends on the two-package cycle described above, as reported by the textual UI: 

    com.xyz.client
       |
       |-> com.xyz.ejb
       |   com.xyz.servlet
       |-> com.xyz.ejb

This indicates that the com.xyz.client package depends on the com.xyz.ejb package, which in turn forms a cyclic dependency with the com.xyz.servlet package. The com.xyz.client package itself isn't part of the cycle, but since it depends on a package in the cycle, it can't be reused/released without it.

 
  Customizing JDepend

JDepend can be customized by using command-line options and/or by creating a jdepend.properties file in the user's home directory or any directory in the classpath.

Components

JDepend can calculate metrics and dependencies for components: packages that contain one or more sub-packages.

For example, given the following package hierarchy: 

com.xyz.package_a.subpackage_a
com.xyz.package_a.subpackage_b
com.xyz.package_a.subpackage_c
com.xyz.package_b.subpackage_a
com.xyz.package_b.subpackage_b

Assume you want to collect metrics and dependencies for the com.xyz.package_a and com.xyz.package_b packages, but not for any of their contained packages. For example, if there is a dependency from com.xyz.package_a.subpackage_a to com.xyz.package_b.subpackage_b, then you want it to be reported as a dependency from com.xyz.package_a to com.xyz.package_b.subpackage_b.

To do that, use the -components command-line argument: 

java jdepend.textui.JDepend -components com.xyx.package_a,com.xyz.package_b /path/to/classes

Note that if component packages are named using the -components option, then no other packages are reported.

Package Filters

JDepend will ignore all package names specified as values to the ignore property name prefix in the jdepend.properties file. By default, no packages are filtered.

The following example jdepend.properties file will ignore all package names prefixed by java, javax, sun, com.sun, and the package com.xyz.tests: 

ignore.java=java.*,javax.*
ignore.sun=sun.*,com.sun.*
ignore.tests=com.xyz.tests

Packages can also be filtered programatically by creating a PackageFilter instance defining the filters and then passing it to the JDepend constructor.

The following example will ignore all package names prefixed by java and javax, in addition to any package filters specified in an existing jdepend.properties file: 

PackageFilter filter = new PackageFilter();
filter.addPackage("java.*");
filter.addPackage("javax.*");
JDepend jdepend = new JDepend(filter);

The following example will ignore only the package names prefixed by java and javax, regardless of any package filters specified in an existing jdepend.properties file: 

Collection filters = new ArrayList();
filters.add("java.*");
filters.add("javax.*");
PackageFilter filter = new PackageFilter(filters);
JDepend jdepend = new JDepend(filter);

Volatility

Packages that are not expected to change can be specifically configured with a volatility (V) value in the jdepend.properties file. V can either be 0 or 1. If V=0, meaning the package is not at all subject to change, then the package will automatically fall directly on the main sequence (D=0). If V=1, meaning that the package is subject to change, then the distance from the main sequence is not affected. By default, all packages are configured with V=1.

For example, a package like java.lang is generally not volatile. That is, for all practical purposes this package is maximally stable. Creating dependencies on it is not cause for concern. Thus, if you include this package in analysis, it's best to set its V=0.

The following example jdepend.properties file will set the java.lang package's volatility to 0: 

java.lang=0

Volatility can also be programatically set on individual packages prior to analysis by creating a package instance, setting its volatility, then registering it with the JDepend instance before analysis.

The following example sets V=0 for the java.lang package: 

JavaPackage javaLang = new JavaPackage("java.lang");
javaLang.setVolatility(0);
// or
JavaPackage javaLang = new JavaPackage("java.lang", 0);
        
JDepend jdepend = new JDepend();
jdepend.addDirectory("/path/to/classes");
jdepend.addPackage(javaLang);
jdepend.analyze();

Wildcards are not supported for configuring sets of packages with a volatility value.

Inner Classes

By default, inner classes are analyzed.

The following example jdepend.properties file will disable analyzing inner classes: 

analyzeInnerClasses=false

 
  Using JDepend With JUnit

In the spirit of extreme programming, metrics can be automatically collected by JDepend so that they never go stale or require visual inspection. Tolerances for any collected metrics, for example the distance from the main sequence (D), can be codified in a JUnit test case that automatically checks the metrics for conformance to a desired result and provides immediate visual feedback. Tests can also be written to fail if any package dependency other than those declared in a dependency constraint are detected. The existence of package dependency cycles can also be automatically checked by a JUnit test. As the software evolves through refactorings, the design quality test cases can be run as a sanity check to ensure that the design has not formed too many undesirable dependencies.

Dependency Constraint Tests

The following example JUnit test case tests whether a package dependency constraint is met. This test fails if any package dependency other than those declared in the dependency constraint are detected:

 JUnit Package Dependency Constraint Test 
import java.io.*;
import java.util.*;
import junit.framework.*;

public class ConstraintTest extends TestCase {

    private JDepend jdepend;


    public ConstraintTest(String name) {
        super(name);
    }

    protected void setUp() {
			
        jdepend = new JDepend();
		
        try { 

            jdepend.addDirectory("/projects/util/classes");
            jdepend.addDirectory("/projects/ejb/classes");
            jdepend.addDirectory("/projects/web/classes");

        } catch(IOException ioe)  {
            fail(ioe.getMessage());
        } 
    }

    protected void tearDown() {
        jdepend = null;
    }
	
    /**
     * Tests that the package dependency constraint
     * is met for the analyzed packages.
     */
    public void testDependencyConstraint() {
        
        DependencyConstraint constraint = new DependencyConstraint();

        JavaPackage ejb = constraint.addPackage("com.xyz.ejb");
        JavaPackage web = constraint.addPackage("com.xyz.web");
        JavaPackage util = constraint.addPackage("com.xyz.util");
		
        ejb.dependsUpon(util);
        web.dependsUpon(util);
		
        jdepend.analyze();		

        assertEquals("Dependency mismatch",
        	true, jdepend.dependencyMatch(constraint));
    }
    
    public static void main(String args[]) {
        junit.textui.TestRunner.run(ConstraintTest.class);
    }
}

Dependency Cycle Tests

The following example JUnit test case tests for the existence of package dependency cycles:

 JUnit Package Dependency Cycle Test 
import java.io.*;
import java.util.*;
import junit.framework.*;

public class CycleTest extends TestCase {

    private JDepend jdepend;


    public CycleTest(String name) {
        super(name);
    }

    protected void setUp() {
			
        jdepend = new JDepend();
		
        try { 

            jdepend.addDirectory("/projects/ejb/classes");
            jdepend.addDirectory("/projects/web/classes");
			jdepend.addDirectory("/projects/thirdpartyjars");
			
        } catch(IOException ioe)  {
            fail(ioe.getMessage());
        } 
    }

    protected void tearDown() {
        jdepend = null;
    }
	
    /**
     * Tests that a single package does not contain
     * any package dependency cycles.
     */
    public void testOnePackageCycle() {
    
        jdepend.analyze();
        
        JavaPackage p = jdepend.getPackage("com.xyz.ejb");
        assertNotNull(p);
        
        assertEquals("Cycle exists: " + p.getName(), 
        	false, p.containsCycle());
    }
    
    /**
     * Tests that a package dependency cycle does not 
     * exist for any of the analyzed packages.
     */
    public void testAllPackagesCycle() {
    
        Collection packages = jdepend.analyze();
        
        assertEquals("Cycles exist", 
        	false, jdepend.containsCycles());
    }
    
    public static void main(String args[]) {
        junit.textui.TestRunner.run(CycleTest.class);
    }
}

Main Sequence Distance Tests

The following example JUnit test case tests the conformance of packages to a distance from the main sequence (D) within project-defined tolerances:

 JUnit Main Sequence Distance Test 
import java.io.*;
import java.util.*;
import junit.framework.*;

public class DistanceTest extends TestCase {

    private JDepend jdepend;


    public DistanceTest(String name) {
        super(name);
    }

    protected void setUp() {
			
        jdepend = new JDepend();
		
        try { 

            jdepend.addDirectory("/projects/ejb/classes");
            jdepend.addDirectory("/projects/web/classes");
            jdepend.addDirectory("/projects/thirdpartyjars");

        } catch(IOException ioe)  {
            fail(ioe.getMessage());
        } 
    }

    protected void tearDown() {
        jdepend = null;
    }
	
    /**
     * Tests the conformance of a single package to a 
     * distance from the main sequence (D) within a 
     * tolerance.
     */
    public void testOnePackage() {
    
        double ideal = 0.0;
        double tolerance = 0.125;  // project-dependent
        
        jdepend.analyze();
        
        JavaPackage p = jdepend.getPackage("com.xyz.ejb");
        assertNotNull(p);

        assertEquals("Distance exceeded: " + p.getName(), 
        	ideal, p.distance(), tolerance);
    }
    
    /**
     * Tests the conformance of all analyzed packages to a 
     * distance from the main sequence (D) within a tolerance.
     */
    public void testAllPackages() {
    
        double ideal = 0.0;
        double tolerance = 0.5;  // project-dependent
        
        Collection packages = jdepend.analyze();
        
        Iterator iter = packages.iterator();
        while (iter.hasNext()) {
            JavaPackage p = (JavaPackage)iter.next();
            assertEquals("Distance exceeded: " + p.getName(), 
            	ideal, p.distance(), tolerance);
        }
    }
    
    public static void main(String args[]) {
        junit.textui.TestRunner.run(DistanceTest.class);
    }
}

 
  Using JDepend With Ant

Ant includes a task for automatically running JDepend.

Java class file directories to analyze are defined by the nested <classespath> element.

Text Reports

The following example Ant task runs JDepend on the build directory and writes the text report to the docs/jdepend-report.txt file:

 JDepend Ant Task 
<target name="jdepend">

    <jdepend outputfile="docs/jdepend-report.txt">
        <exclude name="java.*"/>
        <exclude name="javax.*"/>
        <classespath>
            <pathelement location="build" />
        </classespath>
        <classpath location="build" />
    </jdepend>

</target>

XML Reports

Ant 1.5 and above includes a format attribute for the JDepend Ant task and a default XSL stylesheet to transform a JDepend XML report into an HTML report.

The following example Ant task runs JDepend on the build directory, writes the XML report to the docs/jdepend-report.xml file, and generates the jdepend.html file using the jdepend.xsl stylesheet distributed with Ant 1.5 (and above) in the etc directory:

 JDepend Ant Task 
<target name="jdepend">

    <jdepend format="xml" outputfile="docs/jdepend-report.xml">
        <exclude name="java.*"/>
        <exclude name="javax.*"/>
        <classespath>
            <pathelement location="classes" />
        </classespath>
        <classpath location="classes" />
    </jdepend>

    <style basedir="docs" destdir="docs"
        includes="jdepend-report.xml" 
        style="${ant.home}/etc/jdepend.xsl" />

</target>

 
  Limitations

JDepend has the following known limitations:

 
  Support

If you have any questions, comments, enhancement requests, success stories, or bug reports regarding JDepend, or if you want to be notified when new versions of JDepend are available, please email mike@clarkware.com. Your information will be kept private.

A mailing list is also available to discuss JDepend or to be notified when new versions of JDepend are available.

After experimenting with these metrics on your own designs, feel free to share your findings. Ultimately, if better and different ways to measure designs are discovered, JDepend will support them.

 
  Consulting Services

I offer pragmatic design, development, and mentoring services to help you and your team deliver high-quality software rapidly and predictably. Architecture and design review services are also available to help you effectively build high-quality systems based on today's business needs rather than speculation. My services are always tailored and scaled to your specific needs to deliver maximum business value.

Contact me for more details.

 
  License

JDepend is licensed under the BSD License.

 
  Acknowledgments

Many thanks to Robert Martin for originally describing these design quality metrics and writing the C++ dependency analyzer from which the JDepend framework was adapted. I am especially grateful that he allowed me to "stand on the shoulders of giants" in adapting his work for the Java community.

 
  Resources

 
  Release History

Version 2.8
Date 09.02.2004
Description New features
Changes
  • Components can now be defined using the -components option to any JDepend user interface.
  • Added the Graphviz stylesheet (contrib/jdepend2dot.xsl) to transform the JDepend XML format into the Graphviz dot file format. (Contributed by David Bock.)
  • Fixed a minor bug related to using the exclude tag with the JDepend Ant task.
  • Fixed a minor bug that was exhausting file descriptors for large (2000+) file sets.

Version 2.7
Date 04.10.2004
Description Minor bug fix
Changes
  • Set UTF-8 as the output encoding for the XML output so that the XML file generated is valid if the data contains non-ASCII characters. (Thanks to Olivier Mengue.)

Version 2.6
Date 02.19.2003 (Somewhere between Denver and Austin)
Description New feature
Changes
  • Classes in .jar, .war, and .zip files are now analyzed.
  • Added JavaPackage.collectAllCycles() to support the Eclipse plugin and to start experimenting with more exhaustive cycle detection techniques.

Version 2.5
Date 02.17.2003
Description New features
Changes
  • Source-file analysis is no longer supported.
  • Inner classes are now analyzed by default. To disable analyzing inner classes, set the 'analyzeInnerClasses' property to 'false' in the jdepend.properties file.
  • Added setFilter() method to all JDepend class variants to support new JDepend Ant task which includes an element for excluding packages. (Thanks to Bob Hays for updating the Ant task!)
  • Added JavaClass.getSourceFile() method which returns the name of the source file from which the analyzed class file was generated. Source files must be compiled with debug information (e.g. -g or -g:source), otherwise "Unknown" is returned. (Thanks to Ben Walding for contributing this code!)

Version 2.4
Date 02.05.2003
Description Added one new feature; deprecated one old feature
Changes
  • Source-file analysis is now deprecated. Please adjust to using class-file analysis by simply pointing JDepend at directories containing class files. The next version will not support the analysis of source files.
  • Added support for presetting a volatility (V) value on a package-by-package basis.
  • Unzips into versioned directory.

Version 2.3
Date 01.03.2003
Description Minor bug fixes and enhancements
Changes
  • Removed java.* and javax.* from the default package filter. By default, no packages are filtered.
  • Added a constructor to jdepend.framework.JDepend that takes a PackageFilter parameter. Filters can now be applied by using this constructor or by creating a jdepend.properties file in the CLASSPATH (see samples/jdepend.properties).
  • Fixed several bugs related to properly identifying class and interface names when parsing source files.
  • Fixed bug parsing java.lang.Object
  • Modified jdepend.xmlui.JDepend to always generate XML for the English locale so that '.' is used as the decimal separator. XML Schema identifies a float with a mandatory '.'. XSL is unable to transform decimal separators other than ".".
  • Reorganized directory structure to include top-level 'src' and 'tests' directories.

Version 2.2
Date 10.25.2001
Description JDK 1.4 Support and Documentation Updates
Changes
  • Removed validation of major/minor class file versions during class file parsing to support Java 1.4 and beyond.
  • Added "Interpreting Dependency Cycles" section to documentation.
  • Clean-up of build.xml for consistency and added example use of JDepend Ant task.

Version 2.1
Date 08.06.2001
Description Minor bug fixes
Changes
  • When parsing class files, constant pool class constants that refer to array types are now properly parsed.
  • When parsing source files, leading spaces are now properly parsed for package names, imports, and class declarations.

Version 2.0
Date 08.01.2001
Description Support class file parsing
Changes
  • Added support for parsing class files in addition to source files. Class file parsing is more accurate in its ability to identify referenced packages not directly visible from 'package' or 'import' statements. Analyzed package references include super classes, implemented interfaces, class attribute types, method return types, method parameter types, method exception types, and method local variable types. If a given directory contains both a source file and a class file for the same Java class, then the class file is analyzed and the source file is ignored. Class files must exist in a directory; JAR files are not supported in this release.

Version 1.4
Date 07.20.2001
Description New features
Changes
  • Added package dependency constraints to support writing tests that fail if any package dependency other than those declared in the dependency constraints are detected.
  • Added the jdepend.xmlui.JDepend class to generate the package metrics, dependencies, and cycles in an XML format for easier integration with other tools.

Version 1.3
Date 07.05.2001
Description Detect and report package dependency cycles.
Changes
  • Package dependency cycles can now detected and the packages participating in a package dependency cycle can be traversed. By default, the textual UI prints the hierarchical paths of each package dependency cycle and the graphical UI marks any packages containing cyclic package dependencies with a "Cyclic" label.
  • DistanceExampleTest was renamed to ExampleTest, which now also contains example JUnit test methods for automatically checking for the existence of package dependency cycles.

Version 1.2
Date 05.11.2001
Description Minor upgrades.
Changes
  • Recognition of 'final' and 'strictfp' class modifiers.
  • Trim extra whitespace from imports and class name declaration.
  • Ignore trailing comments from class name declaration.
  • Add delegating addDirectory() method to the jdepend.textui.JDepend and jdepend.swingui.JDepend classes.
  • Improved command-line error handling.

Version 1.1
Date 01.25.2001
Description Initial public release.



Copyright © 1999-2003 Clarkware Consulting, Inc.
All Rights Reserved