Subject:       ltmodem (Forced) paramerters listing, ALL contribute
   Date:       Thu, 14 Jun 2001 12:47:23 -0500
   From:       Marvin Stodolsky <stodolsk@rcn.com>
     To:       LinModems <discuss@linmodems.org>




For those who in the future have to used Forced parameters if would be
good to have a listing of the paramter sets that work. From Siswoyo's
report below, there is effective:
                                           
Forced=3,0x1c0,0x2f8   Sisoyo
Forced=3,0x130,0x2f8    ,from prior reports
Forced=3,0x108,0x2e8 
Forced=3,0xbc, 0x2f8   16 bit PCMCIA

Irq=3 BaseAddress=0x260 ComAddress=0x2f8  ,0260-035f : ltserial
   ..................
ALL,
if you don't see your parameters above, please add in a line and resend
to the List, For those you not needing Forcing, the parameters used can
be read out of /var/log/messages . Additionally, the command
$ cat /proc/ioports |grep ltserial  
  0260-035f : ltserial   
displays the CPU address usage range,  which for me shows as above. 
Let's all contribute to filling out this Table.