
# this report may enable you to solve problems.
# But if further help is needed  send /home/marv/ltmodem-6.00c2/utils/checkout.txt to discuss@linmodems.org
# Please use as the following as the email Subject:
SUBJECT=(checkout, debian, testing/unstable, kernel 2.4.18-idepci)
DISTRO=debian_version
DVERSION=testing/unstable
DISTR=debian
DEVFS=active
UNAME_A=Linux stodolsklap 2.4.18-idepci #1 Thu Mar 7 16:57:21 EST 2002 i686 unknown

Modem hardware information -----------------
DEVICE=00:09.1
00:09.1 Communication controller: ESS Technology ESS Modem (rev 12)
	Subsystem: Gateway 2000: Unknown device 3350
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 3
	Region 0: I/O ports at 1400 [disabled] [size=256]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=100mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

MODEM_ID=125d:1989
	IDs of supported Lucent/Xircom modems
LUCENT 0x11c1          0x0440-0x045c   
XIRCOM 0x115d          0x0000-0x000F   
XIRCOM 0x115d          0x0440-0x045c   
XIRCOM 0x115d          0x0010-0x03ff   

IRQ=3
end Modem hardware information -----------------
start modules section -------------------
MODULES_AT=/lib/modules/2.4.18-idepci/kernel/drivers/char
-rw-r--r--    1 root     root       415419 Mar 26 21:31 lt_modem.o
-rw-r--r--    1 root     root       415419 Mar 25 19:14 lt_modem.o~
-rw-r--r--    1 root     root        29266 Mar 26 21:31 lt_serial.o
-rw-r--r--    1 root     root        29266 Mar 25 19:14 lt_serial.o~
SITE_D=/lib/modules/2.4.18-idepci/kernel/drivers/char/lt_modem.o
SITE_S=/lib/modules/2.4.18-idepci/kernel/drivers/char/lt_serial.o
FAIL=
End modules installed section -------------------

lt_modem.o:
lt_serial.o:	/lib/modules/2.4.18-idepci/kernel/drivers/char/lt_modem.o
end modules dependencies section -------------------
Expected lines are:
---------------------------------
  # lt_drivers: autoloading and insertion parameter usage
  alias char-major-62 lt_serial
  alias /dev/modem lt_serial
  alias /dev/tts/LT0 lt_serial
  # options lt_modem vendor_id=0x115d device_id=0x0420 Forced=3,0x130,0x2f8
  # section for lt_drivers ends
--------------------------------
of which the last two are only relevant to Systems using the device file system.
These lines provide for loading of the modem drivers whenever
there is a query to /dev/tts/LT0 , either directly or through its symbolic links.

Installed lines are:
----------------------------------
# lt_drivers: autoloading and insertion parameter usage
alias char-major-62 lt_serial
alias /dev/tts/LT0 lt_serial
alias /dev/modem lt_serial
# The next line is a syntax example, rarely needed, to automate parameter usage during lt_drivers insertion. See documentation for details 
# options lt_modem vendor_id=0x115d device_id=0x0420 Forced=3,0x130,0x2f8
# section for lt_drivers ends
----------------------------------

Driver loading section ----------------------------
