2009-09-14  Tim Waugh  <twaugh@redhat.com>

	Bumped version for release.

2009-09-10  mvdz  <mvdz@fedoraproject.org>

	Sending translation for Ukrainian

2009-09-10  amitakhya  <amitakhya@fedoraproject.org>

	Sending translation for Assamese

2009-09-09  fvalen  <fvalen@fedoraproject.org>

	Sending translation for Italian

2009-09-09  willwill  <willwill@fedoraproject.org>

	Sending translation for Thai

2009-09-08  taljurf  <taljurf@fedoraproject.org>

	Sending translation for Arabic

2009-09-08  hunter688  <hunter688@fedoraproject.org>

	Sending translation for Czech

2009-09-07  kkrothap  <kkrothap@fedoraproject.org>

	Sending translation for Telugu

2009-09-06  peterve  <peterve@fedoraproject.org>

	Sending translation for Dutch

2009-09-05  palos  <palos@fedoraproject.org>

	Sending translation for Slovak

2009-09-04  Tim Waugh  <twaugh@redhat.com>

	Make sure to cancel the fetchDevices callback when not needed.

	Fetch network devices as soon as local devices are received.
	* system-config-printer.py (NewPrinterGUI.init): Don't connect to
	row-expanded signal.
	(NewPrinterGUI.device_row_expanded): Removed.
	(NewPrinterGUI.fillDeviceTab): Retain thread handle to allow for
	cancellation.
	(NewPrinterGUI.got_devices): Start fetching network devices once local
	devices request has completed.
	(NewPrinterGUI.on_NPCancel): Cancel any pending fetchDevices callback.

	Fixed cancellation in TimedOperation class.
	* timedops.py (TimedOperation): Remember whether a callback was
	initially specified and always operate in callback mode in that case.

2009-09-03  ruigo  <ruigo@fedoraproject.org>

	Sending translation for Portuguese

2009-09-03  Tim Waugh  <twaugh@redhat.com>

	Fixed spinner UI bug.
	* gtkspinner.py (Spinner._next_frame): Fixed spinner UI bug.

	Use callbacks when fetching devices.
	* system-config-printer.py (NewPrinterGUI.__init__): Connect to
	row-expanded signal for devices treeview.
	(NewPrinterGUI.fetchDevices): New optional parameter network.  This
	method is now called in its own thread so don't interact with GTK+ or
	create another thread.
	(NewPrinterGUI.fillDeviceTab): Set 'Other' and 'Network Printer' rows
	only, and start a fetchDevices thread for local devices.
	(NewPrinterGUI.got_devices): Callback function for discovered devices.
	Add them to the treeview if they are new.
	(NewPrinterGUI.device_row_expanded): Fetch network devices if we have
	not already done so.

	Allow for more than one spinner task.
	* system-config-printer.py (NewPrinterGUI.__init__): Initialise
	spinner task count.
	(NewPrinterGUI.inc_spinner_task): New method.
	(NewPrinterGUI.on_btnNetworkFind_clicked): Use it.
	(NewPrinterGUI.dec_spinner_task): New method.
	(NewPrinterGUI.found_network_printer_callback): Use it.

	Allow parameters to cupshelpers.getDevices.
	* cupshelpers/cupshelpers.py (getDevices): Pass keywords through.

	Fixed cupspk support for DevicesGet.
	* cupspk.py (Connection.getDevices): Follow Connection interface more
	closely: first parameter is limit, fourth is timeout, scheme lists are
	lists not strings.

	Extended TimedOperation class to allow callbacks.
	* timedops.py (TimedOperation.__init__): New optional callback and
	context parameters.  Start checking the thread immediately if giving
	a callback.
	(TimedOperation.run): This is not allowed if a callback will be given.
	(TimedOperation._check_thread): Give a callback if requested.
	(TimedOperation.cancel): Prevent callback.

2009-09-03  shanky  <shanky@fedoraproject.org>

	Sending translation for Kannada

2009-09-02  Tim Waugh  <twaugh@redhat.com>

	Allow PPD/device changes for raw queues.
	* system-config-printer.py (GUI.setDataButtonState): Fixed sensitivity
	of Browse... buttons for PPD and Device.

2009-09-02  mgiri  <mgiri@fedoraproject.org>

	Sending translation for Oriya

2009-09-02  sandeeps  <sandeeps@fedoraproject.org>

	Sending translation for Marathi

2009-09-02  kami911  <kami911@fedoraproject.org>

	Sending translation for Hungarian

2009-09-01  kmilos  <kmilos@fedoraproject.org>

	Sending translation for Serbian (Latin)

	Sending translation for Serbian

2009-09-01  runab  <runab@fedoraproject.org>

	Sending translation for Bengali (India)

2009-09-01  anipeter  <anipeter@fedoraproject.org>

	Sending translation for Malayalam

2009-09-01  jassy  <jassy@fedoraproject.org>

	Sending translation for Punjabi

2009-09-01  rajesh  <rajesh@fedoraproject.org>

	Sending translation for Hindi

2009-09-01  leahliu  <leahliu@fedoraproject.org>

	Sending translation for Chinese (Simplified)

2009-08-31  swkothar  <swkothar@fedoraproject.org>

	Sending translation for Gujarati

2009-08-31  kmaraas  <kmaraas@fedoraproject.org>

	Sending translation for Norwegian Bokmål

2009-08-30  kami911  <kami911@fedoraproject.org>

	Sending translation for Hungarian

2009-08-30  jensm  <jensm@fedoraproject.org>

	Sending translation for German

2009-08-30  kami911  <kami911@fedoraproject.org>

	Sending translation for Hungarian

2009-08-29  ifelix  <ifelix@fedoraproject.org>

	Sending translation for Tamil

2009-08-28  vpv  <vpv@fedoraproject.org>

	Sending translation for Finnish

2009-08-28  Tim Waugh  <twaugh@redhat.com>

	Fixed PPD/IPP string translation.

	Make proxy authentication work for all usernames.
	* jobviewer.py (JobViewer.update_job): Don't use "user" attribute for
	keyring look-up.
	(JobViewer.auth_info_dialog_response): More debugging output.

	Fixed proxy authentication.
	* jobviewer.py (JobViewer.on_auth_notification_closed): Removed.
	(JobViewer.on_auth_notification_authenticate): Removed.
	(JobViewer.update_job): Set the keyring attributes for searching.

2009-08-28  xconde  <xconde@fedoraproject.org>

	Sending translation for Catalan

2009-08-28  ypoyarko  <ypoyarko@fedoraproject.org>

	Sending translation for Russian

2009-08-28  tchuang  <tchuang@fedoraproject.org>

	Sending translation for Chinese (Traditional)

2009-08-27  Tim Waugh  <twaugh@redhat.com>

	Fixed traceback with older versions of GTK+.
	The icon-press signal only exists when we have primary/secondary icon
	support in GtkEntry.

	Make new polkit-1 support conditional on "configure --with-polkit-1".
	* configure.in: New --with-polkit-1 configure option, default=no.
	* Makefile.am: Replace @WITH_POLKIT_1@.
	* config.py.in: Set WITH_POLKIT_1.
	* authconn.py: Restore locking exception when using PolicyKit before
	polkit-1.
	* cupspk.py: Restored old PolicyKit code, used unless WITH_POLKIT_1 is
	set.
	* system-config-printer.py (NewPrinterGUI.fetchDevices): Only fetch
	devices in a separate thread if WITH_POLKIT_1 is set.

	Fetch devices in a separate thread to avoid blocking (bug #516787).
	* system-config-printer.py (NewPrinterGUI.fetchDevices): Fetch devices in
	a separate thread if using PolicyKit.  Don't do this if we are not using
	PolicyKit as we would lose any cached credentials for IPP authentication.

	It is now safe to use cups-pk-helper from a non-GUI thread.
	* authconn.py (Connection.__init__): Removed cupspk exception when we
	are in a separate thread.

	Ported to polkit-1.
	* cupspk.py (Connection._obtain_auth): Removed.
	(Connection._handle_exception_with_auth): Removed.
	(Connection._call_with_pk_and_fallback): Handle cancellation in-line.

	Avoid error dialog after cancelling operation via PolicyKit dialog.
	* authconn.py (Connection._authloop): Don't show a dialog here.

2009-08-27  Till Kamppeter  <till.kamppeter@gmail.com>

	Fix cleaning of TurboPrint PPD listings of CUPS 1.4.x to get assigned to the correct printer model.

	Model lists from CUPS 1.4.x seem to be a mixture of Unicode and conventional strings, let the sorting procedure handle this.

2009-08-27  eukim  <eukim@fedoraproject.org>

	Sending translation for Korean

2009-08-26  Tim Waugh  <twaugh@redhat.com>

	Handle icon load failure gracefully.

	Use correct statereason level icon names.

2009-08-26  kristho  <kristho@fedoraproject.org>

	Sending translation for Danish

	Sending translation for Danish

2009-08-26  Tim Waugh  <twaugh@redhat.com>

	Fixed traceback in on_tvNPDeviceURIs_cursor_changed (bug #519367).
	* system-config-printer.py
	(NewPrinterGUI.on_tvNPDeviceURIs_cursor_changed): Use get_cursor
	instead of get_selected and avoid traceback (bug #519367).

2009-08-26  hyuuga  <hyuuga@fedoraproject.org>

	Sending translation for Japanese

2009-08-25  warrink  <warrink@fedoraproject.org>

	Sending translation for Dutch

2009-08-25  Tim Waugh  <twaugh@redhat.com>

	update-po

	Bumped version for release.

	Don't allow Back/Forward to lose troubleshooting diagnostic information.
	* troubleshoot/ErrorLogCheckpoint.py
	(ErrorLogCheckpoint.collect_answer): Don't allow Back/Forward to
	lose any debugging output from error_log.
	(cherry picked from commit cf65ee6f6592a3ba01606a02b94907e43653802f)

	Don't install RPM provides script.

	Neater bash-wrapping.

	Fixed bash-wrapping for postscriptdriver.prov.

	Bash-wrapped postscriptdriver.prov.

	postscriptdriver.prov: Handle one level of symlinks.

2009-08-24  Tim Waugh  <twaugh@redhat.com>

	Don't allow Back/Forward to lose troubleshooting diagnostic information.
	* troubleshoot/ErrorLogCheckpoint.py
	(ErrorLogCheckpoint.collect_answer): Don't allow Back/Forward to
	lose any debugging output from error_log.

	Source code tidying in applet.py.
	* applet.py: Avoid line continuation slashes.

	Fixed applet traceback when printing test page.
	* applet.py (NewPrinterNotification.NewPrinter): Set devid before
	using it.

2009-08-22  igor  <igor@fedoraproject.org>

	Sending translation for Brazilian Portuguese

2009-08-21  Jiri Popelka  <jpopelka@redhat.com>

	Removed notification when job has completed (trac #181).

	Fixed mixed indentation (Tab -> spaces)

2009-08-21  Tim Waugh  <twaugh@redhat.com>

	Added experimental package tagging for PPD files.
	* postscriptdriver.prov: New file.
	* Makefile.am: Ship and install it.

2009-08-20  Tim Waugh  <twaugh@redhat.com>

	Better consistency with printer icons (bug #518020).
	* system-config-printer.py (GUI.populateList): Only use paused icon for
	disabled printers.  Rejecting printers show as insensitive.  Overlay
	state reason icon if appropriate.

	Use paused icon when printer state reason is 'paused'.
	* system-config-printer.py (GUI.updateStateReasons): Store icon name, not
	reason level.  Use gtk.STOCK_MEDIA_PAUSE for 'paused'.
	(GUI.set_printer_state_reason_icon): Updated.

	Small fix for cupshelpers.
	* cupshelpers/cupshelpers.py (Printer.__init__): Store all supplied
	attributes in other_attributes instance variable initially.

2009-08-20  Till Kamppeter  <till.kamppeter@gmail.com>

	Fixed driver selection.
	This change is needed for models which support PostScript but where
	the OpenPrinting database recommends a PCL driver. I have recommended
	PCL drivers on PostScript printers for two reasons:

	1. The printer ships with not enough memory for PostScript. This made
	many users complain and report bugs. Examples are HP LaserJet
	12xx/13xx.

	2. The printer does not ship with the PostScript interpreter by
	default, but the manufacturer has uploaded a PostScript PPD to
	OpenPrinting.

	To make these printers work out of the box I have made
	system-config-printer preferring the "recommended" driver of the
	OpenPrinting database over the native PostScript PPD. I have never let
	it prefer a generic PostScript PPD over a manufacturer-supplied one.

	I have found a real bug now:

	The HP LaserJet 12xx/13xx got explicitly forced to use the HPIJS
	driver and not the newer hpcups driver the recommended pxlmono (PCL
	6/XL, 1200 dpi instead of 600 dpi). I have removed the exception and
	now pxlmono gets used.

2009-08-20  Tim Waugh  <twaugh@redhat.com>

	Job status icon and state reason in jobs treeview (bug #518070).
	* jobviewer.py (JobViewer.__init__): Use cell data functions for the main
	treeview.  Just store jobid and job creation time in the treestore.
	(update_job): Invalidate cached status description and redraw the status
	icon.
	(add_state_reason_emblem): Optionally calculate the worst state reason
	for a given printer.
	(state_reason_added, state_reason_removed): Redraw the treeview so that
	the icon is recomputed.

	Only update job creation times once per minute at rest.
	* jobviewer.py (JobViewer.add_job): Just update job creation times once
	here.

	Kill job creation times timer on the jobviewer is destroyed.
	* jobviewer.py (cleanup): Kill job creation times timer.

	Use symbolic icon name instead of string literal.
	* system-config-printer.py (GUI.populateList): Use gtk.STOCK_MEDIA_PAUSE
	here.

2009-08-20  beckerde  <beckerde@fedoraproject.org>

	Sending translation for Spanish

2009-08-20  Tim Waugh  <twaugh@redhat.com>

	Use preferred object path for AuthenticationAgent (bug #518427).
	* cupspk.py: Use preferred object path for AuthenticationAgent.

2009-08-19  Tim Waugh  <twaugh@redhat.com>

	Updated British translation.

2009-08-19  raven  <raven@fedoraproject.org>

	Sending translation for Polish

2009-08-19  Tim Waugh  <twaugh@redhat.com>

	update-po

	Show a 'paused' emblem for rejecting/disable printers (bug #518020).
	* system-config-printer.py (GUI.printer_event): Update the icon view.
	(GUI.populateList): Set a 'paused' emblem on the icon if the queue is
	rejecting or disabled (bug #518020).

	Fixed cupspk handling of disabling a printer.
	* cupspk.py (Connection.disablePrinter): Use the correct fallback
	function.

	Set an appropriate status icon tooltip when configuring printer (bug #518007).
	* jobviewer.py (JobViewer.set_special_statusicon): Allow a tooltip
	to accompany a special status icon.
	* applet.py (NewPrinterNotification.GetReady): Set an appropriate
	tooltip (part of bug #518007).

2009-08-18  Tim Waugh  <twaugh@redhat.com>

	Use separate thread for verifying IPP queue (bug #518065).
	* system-config-printer.py (NewPrinterGUI.on_btnIPPVerify_clicked):
	Use TimedOperation here.

	timedops: allow cancel method to be used as a timeout callback.

	Fixed WaitWindow transience when changing PPD.

	Busy/ready cursor handling fixes.

	Prefer native CUPS drivers to foomatic drivers.

	Another small fixed for gutenprint driver identification.

	Fixed identification of CUPS native gutenprint drivers.

	Removed pango import.
	We no longer need pango as we don't ellipsize any strings now.

	Better looping.

	Fixed typo.
	* system-config-printer.py (GUI.rename_printer): Fixed typo in error
	handling case.

2009-08-18  jensm  <jensm@fedoraproject.org>

	Sending translation for German

2009-08-18  Tim Waugh  <twaugh@redhat.com>

	Fixed missing treeview update in properties dialog.
	* system-config-printer.py (GUI.updatePrinterProperties): Actually
	call the function to update the treeview, rather than naming it.

	Removed unnecessary comma at end of line.

	Don't iuse deprecated string.find() in cupspk.

	Removed unnecessary semi-colons.

	Use set_default_size instead of setting width and height properties.

	Fixed typo handling exceptions from AdvancedServerSettingsDialog.
	* system-config-printer.py (GUI.on_adv_server_settings_apply):
	Fixed typo.

	More tooltips fixes.

2009-08-18  Paolo Borelli  <pborelli@gnome.org>

	Use modern gtk tooltip support.

2009-08-18  kami911  <kami911@fedoraproject.org>

	Sending translation for Hungarian

2009-08-14  Tim Waugh  <twaugh@redhat.com>

	udev-configure-printer: Compare MFG and MDL case-insensitively.
	HPLIP reports incorrect Device IDs (launchpad #405804).

	* udev/udev-configure-printer.c (find_matching_device_uris): Use
	strcasecmp instead of strcmp for MFG and MDL fields.

	Support for cups-pk-helper's DevicesGet method.
	* cupspk.py (Connection.getDevices): New method.  Based on a patch by
	Marek Kašík.

	Don't attempt to use PolicyKit if we are root.
	* authconn.py (Connection._connect): Don't use PolicyKit if we are
	root.

2009-08-13  Tim Waugh  <twaugh@redhat.com>

	Fixed parenting of WaitWindow when adding printer.
	The WaitWindow widget is only used by the NewPrinterGUI object so load
	it there.  Use the NewPrinterWindow widget as the parent when
	displaying the WaitWindow, except when fetching devices which occurs
	before that window is presented.

2009-08-13  Jiri Popelka  <jpopelka@redhat.com>

	Added support for localized marker names (trac #183).

2009-08-11  Till Kamppeter  <till.kamppeter@gmail.com>

	HP's Bluetooth printers return a model name with added "_BT" in their device ID. This breaks PPD file matching. This change removes this suffix before comparing model names.

2009-08-11  Tim Waugh  <twaugh@redhat.com>

	Don't get tripped up by "-" when checking for missing executables.
	* cupshelpers/cupshelpers.py (missingPackagesAndExecutables):
	Accept a filter of "-" (Ubuntu #411376).

2009-08-07  Tim Waugh  <twaugh@redhat.com>

	update-po

	Build XZ tarball. (cherry picked from commit 6de5c892171318abc08a489041c77b0980bb6355)

	Bumped version for release.

	Adjusted PPDs test suite for HP PSC 2210.
	HPLIP now provides a native driver for the HP PSC 2200 series, so that
	is now the preferred PPD.

	Validate BrowsePoll entries (bug #493839).
	* AdvancedServerSettings.py
	(AdvancedServerSettingsDialog.on_browse_poll_edited): Use
	socket.getaddrinfo() to validate edited value as numeric IP address.  If
	that fails, verify the value is a valid hostname.

	Make properties dialog OK button insensitive when no changes (bug #493891).
	* system-config-printer.py (GUI.setDataButtonState): Make OK button
	sensitivity depdendent on there being changes made.

	udev-configure-printer: fixed removal when cupsd not running.
	If the queue for a device has been removed, then cupsd is stopped, and
	then the device is disconnected, reconnecting the device once cupsd
	has been re-started fails to add a queue.

	The fix is always to remove the usb-uris line for the device on
	disconnection even if we cannot connect to cupsd.

	* udev/udev-configure-printer.c (cups_connection): Removed.
	(find_matching_device_uris): Exit if unable to connect to cupsd.
	(for_each_matching_queue): Return early if unable to connect.
	(enable_queue, disable_queue): Likewise.
	(main): Set the CUPS password callback here.

2009-08-05  Tim Waugh  <twaugh@redhat.com>

	Revert "Split out D-Bus system service for adding the printer."
	This reverts commit 98564e671c84c831a9a6b0706659fb99783bc57c as it
	introduced a race condition between:

	a) the udev callout fetching the Device ID from the device, and
	b) CUPS backends responding to CUPS-Get-Devices, called from the D-Bus
	service, fetching the Device IDs from USB devices.

2009-08-02  beckerde  <beckerde@fedoraproject.org>

	Sending translation for Spanish

2009-08-02  Tim Waugh  <twaugh@redhat.com>

	troubleshoot: treat http and https schemes as potential CUPS servers.
	* troubleshoot/CheckNetworkServerSanity.py: Recognize http and https
	schemes and try to connect to a CUPS server.  Use encryption for
	https.
	* troubleshoot/CheckPrinterSanity.py: Include https in the list of
	network schemes.

2009-08-01  igor  <igor@fedoraproject.org>

	Sending translation for Brazilian Portuguese

2009-07-31  raven  <raven@fedoraproject.org>

	Sending translation for Polish

2009-07-31  Tim Waugh  <twaugh@redhat.com>

	Updated British translation.

	update-po

	API improvement in cupshelpers: limit job fetches.
	* cupshelpers/cupshelpers.py (Printer.jobsQueued): New optional limit
	parameter.
	(Printer.jobsPreserved): Likewise.
	(Printer.testsQueued): Likewise.
	* system-config-printer.py (GUI.rename_confirmed_by_user): Use it.
	(GUI.is_rename_possible): Likewise.

	Small improvements for printer rename confirmation.
	* cupshelpers/cupshelpers.py (Printer.jobsPreserved): Removed
	pprint import.  Just fetch 'completed' jobs, not 'all'.  Handle job
	attribute 'job-state' absence.
	* glade/RenamePrinter.glade: Removed.
	* system-config-printer.py (GUI.rename_confirmed_by_user): Build
	dialog programmatically instead.

2009-07-31  Jiri Popelka  <jpopelka@redhat.com>

	A warning is given that renaming destroys print job history.

2009-07-31  Tim Waugh  <twaugh@redhat.com>

	Fixed cupspk's implementation of adminGetServerSettings().
	* cupspk.py (Connection.adminGetServerSettings): Fixed handling of
	dbus.String types.  Patch from Marek Kašík.

	jobviewer: notice jobs that have stopped due to backend errors.
	* jobviewer.py (JobViewer.job_event): If a backend fails, CUPS
	doesn't stop the job at all but stops the printer, the job-state being
	set back to IPP_JOB_PENDING.  Watch for this scenario and warn the
	user about the problem.

	Create better ChangeLogs by omitting merge commit logs.
	* Makefile.am: Added "-- --no-merges" to the gitlog-to-changelog
	invocation.

2009-07-30  Till Kamppeter  <till.kamppeter@gmail.com>

	Let the checks for adding a device to a physicaldevice object parse HPLIP URIs correctly to extract the host name/IP from them

	Updated the "hp-info" call to check fax capability of an HP printer to work with HPLIP 3.9.6.

	Updated installation of the HPLIP plug-in to the needs of HPLIP 3.9.6.

2009-07-29  ccielogs  <ccielogs@fedoraproject.org>

	Sending translation for Italian

2009-07-27  Tim Waugh  <twaugh@redhat.com>

	Printer icon should not show 'printing' when job stopped.
	* jobviewer.py (JobViewer.job_event): Update job status after
	handling updated job data.

	Better method of determining current device URI.
	* system-config-printer.py (NewPrinterGUI.getDeviceURI): Use the
	notebook page number to decide whether we already have the device
	URI rather than having two lists of optionless backends.  Don't give
	valid URIs for empty socket, lpd or smb URI types.

2009-07-27  Till Kamppeter  <till.kamppeter@gmail.com>

	Made the field for freely typing in an URI actually work.

	Made extracting make and model from the NickName of TurboPrint PPDs working again.

2009-07-26  charnik  <charnik@fedoraproject.org>

	Sending translation for Greek

2009-07-26  Till Kamppeter  <till.kamppeter@gmail.com>

	Use case-insensitive matching when cleaning up the PPD nick names to get the model names for the make/model/driver list.

2009-07-26  Tim Waugh  <twaugh@redhat.com>

	Split out D-Bus system service for adding the printer.
	The udev rule now just invokes a program that simply gives the correct
	devpath to com.redhat.PrinterConfig.UsbPrinterAdd/Remove.  The work of
	deciding whether to enable, disable or add the printer is done in the
	D-Bus system service by printer-config-daemon.

	Revert "Fixed file descriptor leak in udev-configure-printer."
	This reverts commit 7682b865c6a59be7ddf6cba32fe0380ab58c0d24.

2009-07-25  Tim Waugh  <twaugh@redhat.com>

	Fixed file descriptor leak in udev-configure-printer.
	* udev/udev-configure-printer.c (read_usb_uri_map): Close the file
	descriptor.

2009-07-24  Tim Waugh  <twaugh@redhat.com>

	udev-configure-printer: fixed duplicate devpath check.
	* udev/udev-configure-printer.c (device_id_from_devpath): Fixed
	devpath check.  Patch from Till Kamppeter.
	(device_id_from_devpath): Fixed memory leak.

	udev-add-printer: create fax queues using prefix of printer queue.
	* udev/udev-add-printer: Use the name of the printer queue as a prefix
	for the name of the fax queue.  Fax PPDs have model names like "Fax"
	which is not specific to a particular model.

	Add a dash before the numeric suffix when making names unique.
	* system-config-printer.py (GUI.makeNameUnique): Add a dash before
	the numeric suffix.

	Notify the correct printer name in udev-add-printer.
	* udev/udev-add-printer (create_queue): Return unique name.
	(add_queue): Notify unique name.

	Fixed name uniqueness checking in udev-add-printer.
	* udev/udev-add-printer (create_queue): Printer names are not
	case-sensitive.  Don't consider discovered queues as conflicting.
	(add_queue): Give printers list to create_queue, not just their
	names.

	udev-add-printer: don't require pycups 1.9.46 just yet.
	* udev/udev-add-printer (add_queue): Don't use include_schemes
	parameter if pycups doesn't yet support it.

	White-space change only.
	* udev/udev-configure-printer.c (do_add): Don't exceed 80 characters per
	line.

	Exit early in udev-configure-printer if device already mapped to URIs.
	* udev/udev-configure-printer.c (device-id_from_devpath): Scan map entries
	to see if this devpath has already been mapped to device URIs and exit if
	so.
	(find_matching_device_uris): No need to scan map entries here now.
	(do_add): Pass map pointer to device_id_from_devpath.

	Serialize CUPS-Get-Devices requests in udev-configure-printer.
	* udev/udev-configure-printer.c (do_add): Call fork() first, then lock the
	map file before discovering which device URIs correspond with this device.
	(find_matching_device_ids): New parameter 'map'.
	Patch from Till Kamppeter.

	Don't set USB configuration in udev-configure-printer.
	* udev/udev-configure-printer.c (device_id_from_devpath): Don't call
	usb_set_configuration.  Patch from Till Kamppeter, explanation below:
	We cannot set (and also need not set) the configuration of the USB
	device. This conflicts with usb-storage if the printer contains a USB
	mass storage device like memory card readers. This made all photo
	inkjets not getting re-enabled as they have memory card readers for
	pc-less photo printing.

	Fixed missing loop variable initializations.
	* udev/udev-configure-printer.c (device_id_from_devpath): Set conf and
	iface to 0 each time round their respective loops.  Patch from Till
	Kamppeter.

2009-07-23  Tim Waugh  <twaugh@redhat.com>

	udev-configure-printer: make sure we don't configure the same printer twice.
	* udev/udev-configure-printer.c (find_matching_device_uris): If a
	devpath mapping was already made for this device, abort.

	udev-configure-printer: use '/' as delimiter when examining device URI.
	* udev/udev-configure-printer.c (find_matching_device_uris): Also
	use '/' as a delimiter when looking for the USB serial number in
	the device URI.

	udev-configure-printer: use USB serial numbers if present even if short.
	* udev/udev-configure-printer.c (find_matching_device_uris): Some
	USB serial numbers (e.g. HP Color LaserJet CM3530) are only 10
	characters long.  Use USB serial numbers if present, regardless of
	length.

	Enable/disable queues with paired device URIs in udev-configure-printer.
	* udev/udev-configure-printer.c (find_matching_device_uris): Use the
	exclude-schemes attribute instead of include-schemes so that we can
	look for paired device URIs, i.e. device URIs that are identical except
	for the scheme part.
	* udev/udev-add-printer (add_queue): We are given paired device URIs now
	so look for those ending in "fax" and just fetch Device IDs from them.

	udev-configure-printer: don't fork if DEBUG environment variable set.
	* udev/udev-configure-printer.c (do_add): Check DEBUG environment variable
	and don't fork if it is set.

	Fixed typo.
	* udev/udev-add-printer (create_queue): Fixed typo.

	udev-add-printer: don't add fax queue if already present.
	* udev/udev-add-printer (add_queue): Check whether this URI is present
	in the list of device URIs already assigned to queues.

	Better variable naming in udev-configure-printer.
	* udev/udev-configure-printer.c: Use 'usbserial' as the variable name
	for storing a USB serial number, not 'serial' which may be confused
	with the Device ID 'SERN' field.

2009-07-22  Tim Waugh  <twaugh@redhat.com>

	Filter out device URIs not asked for in udev-configure-printer.
	* udev/udev-configure-printer.c (find_matching_device_uris): Filter
	returned device URIs in case the include-schemes attribute was ignored
	(as in CUPS prior to 1.4).

	Fixed incorrect free() in udev-configure-printer.
	* udev/udev-configure-printer.c (find_matching_device_uris): Avoid
	freeing memory we need to reference.

	Install udev rules in the right place.
	* Makefile.am: Don't use nobase_ prefix for udev rules rule.

	Bumped version for release.
	* configure.in: Version 1.1.10.

	Always ship udev/udev-add-printer.
	* Makefile.am: Explicitly ship udev/udev-add-printer as
	udevhelper_SCRIPTS will not be set unless configured with
	--with-udev-rules.

	update-po

	Bumped version for release.
	* configure.in: Version 1.1.9.

	Fixed Device ID matching for HPLIP PPDs.
	* cupshelpers/ppds.py (PPDs.getPPDNameFromDeviceID): Try using HP as
	an alias for Hewlett-Packard when looking up by ID.
	(_self_test): Fixed test case.

	Fixed tracebacks in cupshelpers.ppds test suite.
	* cupshelpers/ppds.py (_self_test): Fixed typo when using --help, and
	traceback when using --deviceid.

	Make udev rules dependent on --with-udev-rules configure option.
	* configure.in: New option --with-udev-rules, default=no.  Make
	AM_PROG_CC_C_O conditional on it.
	* Makefile.am: Make udev-related rules conditional on it.

	udev-configure-printer: comments about usb-uris fields.

	udev-configure-printer: prefer the hp backend over the usb backend.
	* udev/udev-configure-printer.c (device_uri_types): Prefer the hp
	backend over the usb backend.  The hpijs driver currently uses the
	hp backend to tell it whether to report low ink etc.
	Don't include the hpfax scheme as this will never match a USB
	device.

	udev-configure-printer: concatenate non-serial URIs onto serial URIs.
	* udev/udev-configure-printer.c (find_matching_device_uris):
	Concatenate device URIs that did not match by serial number onto the
	end of the list of device URIs that did.

	Fixed locking in udev-configure-printer.
	* udev/udev-configure-printer.c (struct usb_uri_map): Store the file
	descriptor for the file here.
	(add_usb_uri_mapping): Updated.
	(read_usb_uri_map): Open the file read-write, creating it if
	necessary.  Set a write lock and keep the file open until write/free.
	Avoid stdio.
	(write_usb_uri_map): Rewind file and truncate it.
	(free_usb_uri_map): Updated.  Close file descriptor if open.
	(find_matching_device_uris): Updated.
	(do_remove): Updated.

	Fixed udev-add-printer for multiple URI matches and fax queues.
	* udev/udev-add-printer (add_queue): Don't append "-fax" to fax queue
	name as the name is already derived from the fax-specific model name.
	Fixed parameters for add_queue call creating fax queue.  Fixed D-Bus
	error logging.
	(top-level): Allow more than two arguments.

2009-07-21  Tim Waugh  <twaugh@redhat.com>

	Fax support in udev-add-printer.  HPLIP changes required.
	* udev/udev-configure-printer.c (do_add): Give the Device ID to
	udev-add-printer as its first argument and pass all device URIs as the
	following arguments.
	* udev/udev-add-printer (add_queue): Find device URI matching any we
	were given but with a URI scheme ending in "fax"; add fax queue if
	found.

	For this to work we need HPLIP to give a correct device-id during
	device discovery.

	Truncate the usb-uris when writing it in udev-configure-printer.
	* udev/udev-configure-printer.c (write_usb_uri_map): Use O_TRUNC.

	Small efficiency fix for udev-configure-printer.
	* udev/udev-configure-printer.c (find_matching_device_uris): Don't
	bother validating the USB serial number if we already matched the SERN
	fields.

	Fixed bad merge.

	Fixed hang on start-up when trying to resize the window.
	* system-config-printer.glade: Larger default height for main window,
	and start it hidden.
	* system-config-printer.py (GUI): Decide on a default size for the
	main window before showing it.

	udev-configure-printer: handle devices with no SERN Device ID field.
	* udev/udev-configure-printer.c (add_device_uri): New function.
	(read_usb_uri_map): Use it.
	(find_matching_device_uris): Likewise.
	(device_id_from_devpath): Fetch USB serial number.
	(do_add): Pass USB serial number to find_matching_device_uris.
	(find_matching_device_uris): Try to match SERN field values when
	present.  Failing that, try to match USB serial number against
	device-id's SERN field.  Failing that, look for USB serial number in
	device URI.  If no device URIs match that way, use whatever device
	URIs matched the MFG and MDL fields.

2009-07-21  pingman  <pingman@fedoraproject.org>

	Sending translation for Chinese (Simplified)

2009-07-21  Tim Waugh  <twaugh@redhat.com>

	Lock the usb-uris file in udev-configure-printer.
	* udev/udev-configure-printer.c (read_usb_uri_map): Set a read lock
	on the file.
	(write_usb_uri_map): Set a write lock on the file.

	Fixed usb-uris parsing from doubling up newlines.
	* udev/udev-configure-printer.c (read_usb_uri_map): Use newline as a
	delimiter as well.
	(for_each_matching_queue): Compare the entire URI.

	Fixed usb-uris memory allocation error in udev-configure-printer.
	* udev/udev-configure-printer.c (read_usb_uri_map): Store a copy of
	each extra URI, not the pointer into the temporary buffer.

	Fixed incorrect usb-uris map lookup in udev-configure-printer.
	* udev/udev-configure-printer.c (do_remove): Use the correct list of
	device URIs (patch from Till Kamppeter).

2009-07-20  Tim Waugh  <twaugh@redhat.com>

	udev-configure-printer: make it actually work.
	Now we have two ACTION=="add" triggers: one for the usb_device and one
	for the USB class driver (usblp) device.  We need both of them
	because:

	* at least one, and soon two, of the CUPS backends will most likely
	  unload the usblp module if it is loaded, in order to use libusb.
	  This means that the usb_device is the only reliable object we can
	  track to see when printers have been disconnected.

	* if the usblp module is already loaded, libusb won't work because
	  usblp holds open the raw device.

	* the usblp module may be blacklisted altogether, as most printer
	  device users use libusb now.

	We have a single ACTION=="remove" trigger for the usb_device.

	On "add" we obtain the Device ID by fair means or foul, depending on
	whether the usblp module is loaded.  We match this against devices
	reported by CUPS using the device-id attribute, and keep a note of
	this mapping of USB devpath to device URIs.  Note that if we fail to
	contact CUPS we just exit -- the idea is that the CUPS initscript will
	replay the udev events after cupsd is started.

	Next, we examine the existing CUPS queues to see if any of them use
	any of the device URIs associated with our device.  If so, and they
	are disabled, and we'd disabled them, we enable them.

	If no queues match, we invoke udev-add-printer to create a queue.

	On "remove" we look up the list of device URIs associated with our USB
	devpath, then examine the existing CUPS queues to see if any of them
	use it.  If so they are disabled.

	A walk in the park.

	(I know which I'd prefer.)

2009-07-19  Tim Waugh  <twaugh@redhat.com>

	More error-checking and logging in udev-configure-printer.
		* udev/udev-configure-printer.c (device_id_from_devpath): Check
		for missing sysattrs.
		(do_add): Show invalid IEEE 1284 Device ID if available.

	udev-configure-printer: quote device URIs in REMOTE_CMD.
	* udev/udev-configure-printer.c (do_add): Put the device URIs in
	single-quotes when exporting REMOTE_CMD (patch from Till
	Kamppeter).

	udev-configure-printer: use libusb to look up IEEE 1284 Device ID.
	* udev/udev-configure-printer.c (device_id_from_devpath): Use libusb
	to look up IEEE 1284 Device ID.

2009-07-18  Tim Waugh  <twaugh@redhat.com>

	udev-add-printer: fixed indentation.

	udev-configure-printer: choose which URI to use.

	udev-configure-printer: there may be more than one matching device URI.
	* udev/udev-configure-printer.c (free_device_uris): New function.
	(find_matching_device_uris): Renamed.  Take a device_uris list.  Allow
	hp and hpfax URI schemes.  Compare using device-id attribute.
	(for_each_matching_queue): Take a device_uris list.
	(do_add): Updated.
	(do_remove): Updated.
	(main): Updated.

	Fixed compiler warnings.
	* Makefile.am: Compile with -Wall.
	* udev/udev-configure-printer.c: Fixed several bugs found by compiler
	warnings.

	udev-configure-printer: only re-enable printers we disabled.
	* udev/udev-configure-printer.c (for_each_matching_queue): Fetch
	printer-state-message attribute and compare with our 'unplugged'
	reason text if we're matching against disabled printers.

	Don't fork too soon in udev-configure-printer.
	* udev/udev-configure-printer.c (main): Moved fork code...
	(do_add): ...here, so that our REMOVE_CMD line gets to udev.

2009-07-17  Tim Waugh  <twaugh@redhat.com>

	New udev-add-printer script for the udev callout.
	* udev/udev-add-printer: New file.
	* Makefile.am: Ship it and install it.

	udev-configure-printer: Call udev-add-printer to add a queue.

	udev-configure-printer: enable/disable matching queues.

	udev-configure-printer: identify existing queue.

	IEEE 1284 Device ID matching for udev-configure-printer.

	Ship and install a udev rules file.
	* udev/70-printer.rules: New file.
	* Makefile.am: Ship and install it.

	Start using libudev in udev-configure-printer.

	Fixed udev-configure-printer's REMOVE_CMD string.

	udev-configure-printer: CUPS connection, with retries.

	.gitignore: ignore files due to compilation.

	udev-configure-printer: syslogging and a bit more structure.

2009-07-16  Tim Waugh  <twaugh@redhat.com>

	File structure for new udev-based queue configuration system.
	* udev/udev-configure-printer.c: New file.
	* Makefile.am: Build and install it.
	* configure.in: Added AM_PROG_CC_C_O.
	* aclocal.m4: Updated.

2009-07-15  Tim Waugh  <twaugh@redhat.com>

	75% speed improvement in ppdMakeModelSplit().
	There is no need to use expensive regular expressions here.  In
	profiling I measured a single cupshelpers.PPDs() operation as spending
	3.933s in ppdMakeModelSplit().  After removing the vast majority of
	regular expression uses this was reduced to 0.984s.

	I hope that the new code handles all real world cases identically.
	Please submit test cases for any that have broken.

2009-07-15  igor  <igor@fedoraproject.org>

	Sending translation for Brazilian Portuguese

2009-07-15  Tim Waugh  <twaugh@redhat.com>

	Don't reload all PPDs if the query has already finished.

	Small speed-up (0.09s) for the case where jockey is not present.

	Avoid reloading all PPDs when calls to jockey fail.

	Drop libsexy support in favour of GTK+ 2.17's equivalent (bug #509299).

	Fixed incorrect "printer not shared on server" message (bug #511407).
	* troubleshoot/NetworkCUPSPrinterShared.py
	(NetworkCUPSPrinterShared.display): Avoid cups.setServer/setPort.

	* troubleshoot/CheckNetworkServerSanity.py
	(CheckNetworkServerSanity.display): Avoid cups.setServer/setPort.
	Fetch the attributes for the correct remote queue (bug #511407).

2009-07-15  beckerde  <beckerde@fedoraproject.org>

	Sending translation for Spanish

2009-07-14  Tim Waugh  <twaugh@redhat.com>

	Efficiency and readability improvements in PPDs Device ID matcher.
	* cupshelpers/ppds.py (PPDs.getPPDNameFromDeviceID): Efficiency
	improvements and more comments.

	Fixed --debug option for PPDs self-test function.
	* cupshelpers/ppds.py (_self_test): Fixed --debug option.

	Efficiency fixes for PPDs Device ID matching.
	* cupshelpers/ppds.py (PPDs.getPPDNameFromDeviceID): Don't recompute
	case-insensitive strings unnecessarily.

	Added PIXMA comment to test suite.
	* cupshelpers/ppds.py (_self_test): Note which driver provides support
	for the Canon PIXMA iP3000.

2009-07-14  Till Kamppeter  <till.kamppeter@gmail.com>

	Improved matching of printer model names: Check case-independently when removing manufacturer names from model names, remove expressions in parantheses ("(...)") from the model name, do not add "HP" as manufacturer name when "edgeline" is somewhere in the middle of the model name, only if it is in the beginning.

2009-07-14  anipeter  <anipeter@fedoraproject.org>

	Sending translation for Malayalam

2009-07-12  raven  <raven@fedoraproject.org>

	Sending translation for Polish

2009-07-11  Tim Waugh  <twaugh@redhat.com>

	Removed IPP browser (trac #178).
	There is no point in having the IPP browser.  It only works for CUPS,
	and CUPS has its own browsing mechanism.

	Check exit codes for child processes.
	* system-config-printer.py (NewPrinterGUI.install_hplip_plugin):
	Check returncode of child process.
	(NewPrinterGUI.get_hplip_uri_for_network_printer): Likewise.
	(NewPrinterGUI.getNetworkPrinterMakeModel): Likewise.
	* probe_printer.py (PrinterFinder._probe_snmp): Likewise.
	(PrinterFinder._probe_hplip): Likewise.

	Updated British translation.

	New aclocal.m4 from autoconf 1.11.

	update-po

	Don't mention the job number in completed jobs notification (trac #170).
	* jobviewer.py (JobViewer.notify_completed_job): No need to
	mention the job number in "document printed" notification (trac

2009-07-10  Tim Waugh  <twaugh@redhat.com>

	Don't run Properties dialog on new printer (trac #170).
	* applet.py (NewPrinterNotification.NewPrinter): Don't run the
	Properties dialog when notifications actions are not supported
	(trac #170).

	Make sure to URL-encode usernames and passwords correctly (bug #509588).
		* smburi.py (_urlquote): New function for URL-encoding strings.
		URL-encode "/", "@" and ":" characters as well.
		(SMBURI._construct): Use it (bug #509588).

	Fixed initial radio button selection for SMB authentication.
	* system-config-printer.py (NewPrinterGUI.init): When changing a
	device URI for the smb backend, start with 'prompt user if
	authentication is required' selected.

	Avoid possible traceback when receiving printer-added-events.
	* system-config-printer.py (GUI.printer_event): Avoid possible
	traceback when receiving printer-added events.

2009-07-07  Tim Waugh  <twaugh@redhat.com>

	Fixed UI oddities when changing PPD/device (trac #143).
	* system-config-printer.py (GUI.setDataButtonState): Don't allow
	the 'Change...' buttons for PPD or device to be clicked if doing
	so would lose changes (trac #143).
	(NewPrinterGUI.on_btnNPApply_clicked): Select 'Settings' in the
	printer properties treeview after PPD or device is changed (trac

	Always update the jobviewer status icon on job events (trac #174).
	* jobviewer.py (JobViewer.job_event): Always update the icon
	status, not when the active jobs list changes between empty and
	non-empty (trac #174).

2009-07-07  swkothar  <swkothar@fedoraproject.org>

	Sending translation for Gujarati

2009-07-06  Tim Waugh  <twaugh@redhat.com>

	Don't use hard-coded "python" program name in Makefile.
	* Makefile.am: Use "$(PYTHON)" instead of "python" throughout.

2009-07-06  ruigo  <ruigo@fedoraproject.org>

	Sending translation for Portuguese

2009-07-04  igor  <igor@fedoraproject.org>

	Sending translation for Brazilian Portuguese

2009-07-03  Tim Waugh  <twaugh@redhat.com>

	Use gpk-install-package-name to install packages, not the PK D-Bus API.
	* installpackage.py: Don't use the D-Bus API as it changes too
	often and is now too low-level.  Instead, try to execute
	gpk-install-package-name.

	Map gutenprint filenames to the package name.
	* cupshelpers/cupshelpers.py
	(missingPackagesAndExecutables.pathcheck): Map gutenprint
	filenames to the package name.

	Spot stopped jobs with CUPS 1.4 as well (trac #177).
	* jobviewer.py (JobViewer.job_event): CUPS 1.4 no longer emits a
	job-stopped event, so look for job-state-changed where the
	job-state is IPP_JOB_STOPPED (trac #177).

2009-07-01  Tim Waugh  <twaugh@redhat.com>

	Another fix for selecting an added printer (trac #145).
	* system-config-printer.py (NewPrinterGUI.on_btnNPApply_clicked):
	After adding a printer, make sure only that printer is selected.
	Don't just add it to the pre-existing selection.

2009-06-30  Tim Waugh  <twaugh@redhat.com>

	Small fix for class members arrows: always de-sensitise buttons after use.
	* system-config-printer.py
	(NewPrinterGUI.on_btnNCAddMember_clicked,
	NewPrinterGUI.on_btnNCDelMember_clicked): Always set the button
	insensitive after use.

2009-06-30  Jiri Popelka  <jpopelka@redhat.com>

	Arrows for adding and removing class members are sensitive only if something is selected.

2009-06-25  Tim Waugh  <twaugh@redhat.com>

	Fixed incorrect authentication in the troubleshooter (bug #508102).
	* authconn.py (Connection._show_not_authorized_dialog): Actually
	put the dialog on the screen (bug #508102).

2009-06-24  Tim Waugh  <twaugh@redhat.com>

	Prevent traceback on IPP notification after properties dialog cancelled.
	* system-config-printer.py (GUI.printer_properties_response):
	Don't delete self.printer here as we check it later.  Instead, set
	it to None.  Fixes a traceback when an IPP notification is
	received after a printer properties dialog has been cancelled.

	Make sure we find https URIs from https backend (bug #507628).
	* system-config-printer.py
	(NewPrinterGUI.browse_ipp_queues_thread): Always encrypt when
	browsing for https IPP queues.
	(NewPrinterGUI.on_btnIPPBrowseOk_clicked): Override
	printer-uri-supported for browsed queues that use the https
	scheme (bug #507628).

2009-06-23  Tim Waugh  <twaugh@redhat.com>

	Avoid non-fatal traceback when adding IPP printer (bug #507629).
	* system-config-printer.py (NewPrinterGUI.nextNPTab): Don't log
	non-fatal traceback messages if we cannot connect to the IPP
	printer (bug #507629).

	Parse nmblookup failures correctly in troubleshooter (from bug #507442).
	* troubleshoot/CheckPrinterSanity.py (CheckPrinterSanity.display):
	Parse nmblookup failures correctly (from bug #507442).

2009-06-22  Tim Waugh  <twaugh@redhat.com>

	Avoid traceback when adding new printer.
	* system-config-printer.py (NewPrinterGUI.on_btnNPApply_clicked):
	We need to load the printer's information here, as we use it
	later on.

2009-06-19  Tim Waugh  <twaugh@redhat.com>

	Use git commit logs to generate the ChangeLog file.
	* ChangeLog: Renamed ChangeLog-OLD.
	* gitlog-to-changelog: New build tool from gnulib for generating
	ChangeLog from git commit logs.
	* Makefile.am: Generate ChangeLog in dist-hook.  Ship ChangeLog-OLD.
	* bootstrap: Create dummy ChangeLog to keep automake happy.
	* .gitignore: Ignore dummy ChangeLog.

	Fixed 'location' field for printers added remotely.
		* system-config-printer.py
		(NewPrinterGUI.on_tvNPDeviceURIs_cursor_changed): Set the location
		to the hostname of the server we are connected to, not necessarily
		our own hostname.

2009-06-19  Till Kamppeter  <till.kamppeter@gmail.com>

	Support for HPLIP 3.9.6.

2009-06-18  raven  <raven@fedoraproject.org>

	Sending translation for Polish

2009-06-18  Tim Waugh  <twaugh@redhat.com>

	Bumped version for release.

	Updated aclocal.m4.

	update-po

	Make troubleshooter work again by disabling cupspk for it.
	* authconn.py (Connection._connect): The cupspk module needs to be
	fixed so that it works correctly from a non-UI thread.  Until
	then, avoid using cupspk.Connection in that situation.

2009-06-18  Tim Waugh  <twaugh@worm.elk>

	Make 'make distcheck' succeed again.
	* cupshelpers/ppds.py (_self_test): Show the ppd-make-and-model on
	failure.
	(_self_test): Updated some HPLIP test cases as newer versions of
	HPLIP give different results.

2009-06-18  beckerde  <beckerde@fedoraproject.org>

	Sending translation for Spanish

2009-06-17  Tim Waugh  <twaugh@worm.elk>

	Updated British translation.

	update-po

	Mark 'Advanced...' as translatable in Server Settings dialog (bug #505785).

	Select a newly-added printer (trac #145).
		* system-config-printer.py (NewPrinterGUI.on_btnNPApply_clicked):
		Select a newly-added printer (trac #145).

	Make sure the job context menu cannot get out of date (trac #175).
	* jobviewer.py (JobViewer.__init__): Handle 'row-changed' signal
	from the TreeStore.
	(JobViewer.on_treemodel_row_changed): Make sure the context menu
	gets updated (trac #175).

	Removed some stale code in cupshelpers.
	* cupshelpers/cupshelpers.py (Printer.getAttributes): Removed
	some stale code.

	Track printer state changes for the printer context menu (trac #172).
	* system-config-printer.py (GUI.printer_event): Update printer
	context menu when a printer event is seen (trac #172).

	Fixed conversion from broken-down UTC time to simple UNIX time for held jobs.
	* jobviewer.py (JobViewer.update_job): Fixed conversion from
	broken-down UTC time to simple UNIX time for held jobs.

	Use grey ink-drop when there is no marker-colors value (bug #505399).
	* gtkinklevel.py (GtkInkLevel.__init__): Use grey ink-drop when
	there is no marker-colors value (bug #505399).

2009-06-10  Tim Waugh  <twaugh@worm.elk>

	Scroll to new job if it was added just above the visible range.
	* jobviewer.py (JobViewer.add_job): Scroll to new job if it was
	added just above the visible range.

2009-05-25  mrtom  <mrtom@fedoraproject.org>

	Sending translation for French

2009-05-20  mrtom  <mrtom@fedoraproject.org>

	Sending translation for French

2009-05-15  kristho  <kristho@fedoraproject.org>

	Sending translation for Danish

2009-05-13  Till Kamppeter  <till.kamppeter@gmail.com>

	Reconnect to CUPS if the connection gets lost during the installation of a driver from OpenPrinting.

2009-05-12  charnik  <charnik@fedoraproject.org>

	Sending translation for Greek

2009-05-12  Tim Waugh  <twaugh@worm.elk>

	Clean up temporary PPD files when we're finished with them (bug #498743).
	* system-config-printer.py (GUI.printer_properties_response):
	Delete printer object when we're finished with it.
	(GUI.on_quit_activate): Delete printer lists before exiting.  This
	allows the appropriate __del__ functions to clean up temporary
	files (bug #498743).

2009-05-12  andrmart  <andrmart@fedoraproject.org>

	Sending translation for Norwegian Nynorsk

	Sending translation for Russian

	Sending translation for Norwegian Nynorsk

2009-05-12  willwill  <willwill@fedoraproject.org>

	Sending translation for Thai

2009-05-07  beckerde  <beckerde@fedoraproject.org>

	Sending translation for Spanish

2009-05-05  anipeter  <anipeter@fedoraproject.org>

	Sending translation for Malayalam

2009-05-05  Tim Waugh  <twaugh@worm.elk>

	Fixed XmlHelper crash on invalid XML file (Ubuntu #370469).
	* XmlHelper.py (XmlHelper.__init__): Initialise the in-memory XML
	representation to an empty document, not None (Ubuntu #370469).
